DF238-M1 MOTOR MOUNT 3/4"

The dual- flex engine mount is a true flexible engine mount. There is no metal-to-metal contact
between the supporting and mounting members. The mount has a 1" vertical adjustment. The rubber element
of the mount will withstand temperature extremes and exposures to salt atmosphere, oil and grease. The special
design and construction of the dual-flex engine mount gives a soft cushioning effect under normal loads. As loads increase
from normal the resistance of the mount increases very rapidly with a small amount of deflection. There is no metal-to-metal
contact at any point over the weight range potential thereby eliminating any danger of excessive impact.

DF238-M1 5" weight range 1800-2200lbs